Mounting the Device
Mounting the compact device with a magnet
FIGURE 17 A compact device mounted on a metal surface with ports down
Mounting the device under a metal desk
NOTE
Do not mount the device directly underneath a desktop surface with the top panel facing downward. Mount the device only on
the vertical metal surface of the desk with the front panel ports side facing downward.
Complete the following steps to securely mount a compact device under a metal desktop:
1.
Ensure that the magnet sheet is attached to the bottom panel of the device. Refer to
page 31.
34
Attaching the magnet sheet to the device
Ruckus ICX 7150 Switch Hardware Installation Guide
Part Number: 53-1004928-05
on