Device Overview; Hardware Features - Ruckus Wireless ICX 7150-C12P Hardware Installation Manual

Device Overview

•

Hardware features................................................................................................................................................... 13

• License options....................................................................................................................................................... 14
• Port-side view......................................................................................................................................................... 15
• Nonport-side view................................................................................................................................................... 17
• Device management options................................................................................................................................... 19
• LRM Adapter support..............................................................................................................................................19
Hardware features
The Ruckus ICX 7150 offers the following hardware features and capabilities:
• ICX 7150 Z-series new for this release have the following features:
– 16 2.5G+ Copper ports , that support 100M/1G/2.5G operation.
– 32 1G Copper ports, that support 10M/100M/1G operation.
– 8 SFP+ Fiber Ports supporting 1G/10G operation , in which the first 4 ports can be configured as stacking ports and the last
4 ports can be used for uplink/user port.
– The ports 1/2/1 and 1/2/3 comes up in 10G speed by default.
– The other ports comes up in 1G speed default , enabling 10G on these ports requires a software license. The ports 1/2/1
through 1/2/4 can be configured as stacking port or as user/uplink ports, where as 1/2/5 through 1/2/8 can be configured as
user/uplink ports.
– The first 16 ports complies with the power-over-HDBase T and each port can provide up to 90W.
– The 32 1G Copper ports complies with the IEEE 802.3af/at standard.
• The table below lists the ICX 7150 switch models with 12, 24, or 48 auto-negotiating 10/100/1000 Mbps full duplex RJ-45 ports
that can be used for downlink. These ports reside on slot 1 of the switch and can be non-PoE, PoE/POE+, or PoE+ ports.
TABLE 6 Switch model and corresponding IO port configurations
Switch model
ICX 7150-48
ICX 7150-48P
ICX 7150-48PF
ICX 7150-24
ICX 7150-24P
ICX 7150-C12P
ICX 7150-48ZP
• Two 10/100/1000Base-T full duplex RJ-45 ports that can be used as uplink data ports. These ports reside on slot 2 of the switch.
• Two or four SFP+ optical 10-Gbps full duplex ports that can be used as stacking or uplink data ports. These ports reside on slot 3
of the switch.
• 10-GbE SFP+ dongle for LRM optic (Now supported in this release and onwards).
• Switch Port Extender (PE) mode (not supported currently).
• Maximum two FRUs power supply units.
Ruckus ICX 7150 Switch Hardware Installation Guide
Part Number: 53-1004928-05
Down Link PoE PoE Power
Ports Ports
48x1G Copper NA NA
48x1G Copper 48 370W
48x1G Copper 48 740W
24x1G Copper NA NA
24x1G Copper 24 370W
12x1G Copper 12 124W
16x2.5G 48 1480W
Copper 32x
1G Copper
Up Link / Stacking Ports
2x1G Copper + 4xSFP +
2x1G Copper + 4xSFP+
2x1G Copper +4xSFP+
2x1G Copper + 4xSFP+
2x1G Copper + 4xSFP+
2x1G Copper + 2xSFP
4xSFP + 8xSFP
Stacking Ports
2xSFP+
2xSFP+
2xSFP+
2xSFP+
2xSFP+
2xSFP+
4xSFP+
13