Mounting The Device On A Metal Surface Or Metal Wall - Ruckus Wireless ICX 7150-C12P Hardware Installation Manual

Mounting the Device
Mounting the compact device with a magnet
FIGURE 15 Attaching the logo side of the magnet sheet to the bottom panel of the compact device

Mounting the device on a metal surface or metal wall

CAUTION
Do not mount the device on a surface with the top panel facing downward. Mount the device only on a vertical metal surface with
the front panel port-side facing downward.
CAUTION
Ensure that the metal surface is flat and the texture is smooth to hold the device strongly. Check for other conditions that might
impede secure magnetic mount.
Complete the following steps to securely mount a compact device on a metal surface or metal wall:
1. Ensure that the magnet sheet is attached to the bottom panel of the device. Refer to
page 31.
32
Attaching the magnet sheet to the device
Ruckus ICX 7150 Switch Hardware Installation Guide
Part Number: 53-1004928-05
on