Mounting On A Desktop Or Flat Surface - Ruckus Wireless ICX 7150-C12P Hardware Installation Manual

Mounting the Device

Mounting on a desktop or flat surface

DANGER
Mount the devices you install in a rack as low as possible. Place the heaviest device at the bottom and progressively place lighter
devices above.
DANGER
This equipment is suitable for mounting on concrete or other noncombustible surfaces only.
CAUTION
Make sure the airflow around the front, and back of the device is not restricted.
CAUTION
Never leave tools inside the chassis.
CAUTION
Use the screws specified in the procedure. Using longer screws can damage the device.
CAUTION
The device must be turned off and disconnected from the fabric during this procedure.

Mounting on a desktop or flat surface

Complete the following steps to install the device on a desktop or other flat surface. The device you are installing might look different than
the one in the following illustration.
NOTE
The hardware device illustrated in this procedure is only for reference and may not depict the actual device that you are installing.
28
Ruckus ICX 7150 Switch Hardware Installation Guide
Part Number: 53-1004928-05