Setup And Configuration Menus - FLIR M-SERIES Operator's Manual

IP Interface and PC Operations
Toggle Scene Preset - IR only
This button causes the camera to cycle through four different image settings: Night, Day,
Dock, and High Contrast. The Scene Presets cause the image brightness and contrast to
adjust. Depending on the time of day, weather, and other conditions, one Scene Preset
may be preferable to the others.
Defog
This button starts Defog mode. The heater will turn on for two minutes.

Setup and Configuration Menus

Additional configuration options are available that are not described in this manual. For more
information on setting or changing these camera parameters refer to the Nexus IP Camera
Configuration Guide (FLIR Doc #427-0030-00-28) or contact the local FLIR representative or FLIR
Technical Support.
Setup->IR->ROI (region of interest)
The camera adjustments under the ROI heading allow the user to make changes to the Region Of
Interest. The ROI determines what portion of the image is considered by the Automatic Gain
Control (AGC) algorithm. By default all of the pixels in the image are considered; in some cases it
may provide an improved image if a portion of the image is excluded. For example, the sky is
generally very cold, so if the ROI excludes the sky it may add more contrast to the rest of the
image. A pull-down list offers some convenient options.
432-0003-60-10 Version 100 May 2017 39