General Description; Manual Description; Using This Manual; Safety Notices - Pacific Power Source MS SERIES Operation Manual

Table of Contents

SECTION 1

1.0

GENERAL DESCRIPTION

1.1

This manual is written to provide the information required to use the MS-Series

AC Power Source effectively.

installation, operation and maintenance of the MS series power source units.

1.2

This manual primarily covers installation and operation. It is very important that

the user reads Section 3, INSTALLATION and Section 4, OPERATION, prior to

installing this equipment. A thorough understanding of these two sections is

required to operate this equipment properly.

If questions arise while reading this manual, the user is encouraged to call Pacific

Power Source Inc. Pacific maintains a toll-free number which is 1-800-854-2433

(949-251-1800 Outside the USA), Fax 949-756-0756 or contact us through our

website:

www.pacificpopwer.com

Section 5 discusses maintenance, Section 6 is for service. These sections need

to be read only when such activities are required to be performed.

1.3

MS-Series equipment is capable of transferring very large amounts of electrical

energy very quickly. This basic quality is fundamental to any high-performance

power source. The warnings and cautions listed below should be observed at all

times.

Warnings indicate potentially hazardous situations which, if not avoided, could

result in death or serious injury. All warnings throughout this manual will appear

as shown below.

This Operations Manual describes proper

1-1

GENERAL

Document # 126050-10 Rev E

Table of Contents