Silca Unocode PRO Operating Manual page 7

Operating manual - English UNOCODE PRO
• Machine identification
The machine is provided with an identification label which includes the machine's serial number (fig. 3).
Fig. 3
(*) see Ch.9 "DISPOSAL", page 86.
GRAPHICS ON THE UNOCODE PRO KEY-CUTTING MACHINE
Do not clean with Obligation to read Obligatory use Symbol on
compressed air the manual of safety goggles UTP versions
Adhesive label Mass - RPM Adhesive label Mass - RPM Laser warning labels
Unocode PRO Unocode PRO Flat Steel (Ch. 1.2)
Warning label Place the adhesive label in the
"DANGEROUS MOBILE PARTS" appropriate language in position
(Ch.1.5 "Accessories provided") as shown.
Copyright Silca 2017 3