Copy With Adjustments - Silca Unocode PRO Operating Manual

Operating manual - English
First the display will show:
and then:
- Press STOP to confirm the end of the operation.
- Press ENTER if you wish to cut other keys.
6.4 C
OPY WITH ADJUSTMENTS
In this mode an original key is copied in 3 stages:
• Reading
• Setting up of adjustments
• Cutting
The icon in the lower left corner of the menu can be activated
by the F4 key.
Press F4 again to return to the "Copy from Original" menu.
When you click on F4 the screen changes:
- The icon/figure of the original key placed in the right/hand
clamp (reader side) and an empty left-hand clamp (cutter
side:
A box appears containing adjustments in depth and spaces.
- Press START to start reading.
F4
F4
Copyright Silca 2017
UNOCODE PRO
21