Silca Unocode PRO Operating Manual page 30

UNOCODE PRO
Clamp to use
Cutting
Symbols allowed
Fig. 21
• Press F1 to consult the cutting parameters on the card.
Press STOP to exit.
• Press F2 to set up manual adjustment of cutting depths
and spaces (the adjustment values entered can be saved
as User Parameters).
26
Card No
Key blank measurements
Cutting angle
Symbols associated to cutting depths
Cutting spaces
Measuring unit
Base of the cuts
Copyright Silca 2017
Symbols associated to cutting depths
Adapter if applicable
Number of cuts per side for current key
F1
Key stop
F2
Operating manual - English