Table of Contents
Advertisement
3-10-2. Key operations
Key Entry / State
A key
B key
C key is pressed & held
for 4 - 5 sec.
D key is pressed & held
for 4 - 5 sec.
No key operated for 2 - 3 minutes
E key: water detection switch
E key (when BLD is detected,
when an altitude error occurs,
when locked in the decompression
stop violation state, when locked
in the out-of-range state)
3-10-3. Description of History Clear mode functions
(1) History memory clear functions
• The moment the C key is pressed, the total number of dives segment and
"CLEA" segment begin flashing. If the C key is held down for approximately 5
seconds, the total number of dives is cleared to "0".
• The moment the D key is pressed, the total dive time segment and "CLEA"
segment begin flashing. If the D key is held down for approximately 5 seconds,
the total dive time changes to "0h00".
3-11. Dive Profile mode
• A mode that shows the maximum depth at each profile time setting for dives
saved in Dive Log mode.
History Clear
Invalid
To Dive Log mode history screen
Clear total number of dives
Clear total dive time
To Time mode
To Dive mode
Invalid (audible alarm sounds
while ON)
33
Advertisement
Table of Contents
