Dive Computer; Operation; Switching On Display; Switching Off Display - Uwatec ALADIN PRO ULTRA Operating Manual

2 Dive Computer

2.1 Operation

Switching on display:

Switching off display: – automatically, after three minutes without operation.
The Aladin ® Pro Ultra has 4 operating contacts B, E, +, – on the outside of the housing. For manual ope-
ration, touch base contact B and any one of the other three contacts above the display with moistened
fingers.
- + E
B
II Uwatec Aladin Pro Ultra
® ®
– automatically, on submerging in water or when adaptation to atmospheric
pressure is necessary.
– manually by manipulating contacts on housing.
Contact B:
Base contact, which has to be touched for all operations.
Contact E:
Enter contact. It serves the switching on of the computer, the activation of log-
book and dive-plan mode and the switching between no-stop and decompres-
sion planning. It is also used to confirm inputs and is therefore comparable to
the ENTER- or RETURN-key of a computer.
+ / – contacts:
They initiate the selection of the logbook and dive-plan as well as the setting
of values (time, depth, dive-number, O % mix etc.).
2
II
19