Uwatec Xtender Instruction Manual page 61

• Altitude ranks and altitudes are displayed as shown in the following table.
Altitude Rank
0
1
2 1500 – 2600 m
3 2300 – 6000 m
Error 6000 m or more
• If an A/D error occurs, all mountain icons flash, and the Plan mode NDL indica-
tor shows "– – ". If the E key comes ON when there is an altitude rank error, an
audible alarm sounds, and Dive mode cannot be accessed.
• Dive mode cannot be accessed when nine bars in the PGT bar graph are lit
due to a change in the altitude rank in the surface interval state. If the E key
comes ON in this state, an audible alarm continues to sound until the E key
goes OFF.
< Altitude Ranks 1, 2, 3 Display >
Altitude Altitude Rank Display
1000 m or less None
700 – 1800 m Lights at rank 1
Lights at rank 2
Lights at rank 3
Flashes at rank 3
< Altitude Rank Error Display >
Altitude rank flag
flashes
59