Table of Contents
Advertisement
temperature display units between meters and degrees Celsius (m & °C) and
feet and degrees Fahrenheit (ft & °F). (The default setting is m & °C).
• The Dive Set mode screen appears once the B key is pressed. The unit display
changes if the B key is held down continuously.
(4) Audible ascent rate violation alarm ON/OFF selector function
• Simultaneously press and hold the C key and D key for approximately 15 sec-
onds to toggle the audible ascent rate warning ON/OFF. (The default setting is
ON.)
• When the audible alarm is switched ON or OFF, a confirmation tone sounds
once.
• When the audible alarm is turned back ON, the SLOW flag flashes for 1 sec-
ond.
3-8. Dive Set mode
• A mode for setting the fraction of oxygen (FO2), the User Safety Factor (USF),
and the profile time (Pt).
• Dive Set mode cannot be accessed if the surface interval is less than 10 min-
utes and FO2 is not in the default state.
• Dive Set mode can be accessed if the surface interval is less than 10 minutes
but FO2 is in the default state.
• When the out-of-range state or decompression stop violation state are locked,
Dive Set mode cannot be accessed, since Dive Plan mode is skipped.
22
Advertisement
Table of Contents
