Table of Contents
Advertisement
(8) PO2 indicator function
• Displays the PO2 level.
• The PO2 indicator appears only if the FO2 setting has been set to 22% or
higher (nitrox), and when FO2 setting is Air, the display does not appear.
• The display appears at a depth of 1.5 m or greater and disappears at a depth
of 1.4 m or less.
(9) Water temperature measurement function
• Measures water temperature.
• The display appears in Dive Demand C.
• Measurement interval:
• Display measurement range: -5.0 – 45.0°C (23 – 113°F)
• Display units:
• Anomolous display:
(10) Lowest water temperature memory function
• The lowest water temperature at the time a dive is finalized is saved in
memory and displayed in Dive Log mode.
(11) Ascent rate violation warning function
• The ascent rate warning is indicated by a 6-second flashing of the current
depth and SLOW flag displays. An audible alarm also sounds for 3 seconds for
each warning.
• If the ascent rate warning disappears, the SLOW flag disappears.
• If two consecutive ascent rate warnings are issued, the ascent rate warnings
are saved as log data.
(12) Log, history and profile memory function
• Profile memory can be created for each dive, up to a dive time of 600 minutes.
• If the dive time for a single dive extends beyond 600 minutes, thereby going
1 min.
0.1°C (1°F)
"Lo" appears if a temperature of less than
–5°C is detected.
"Hi" appears if a temperature of more than
45°C is detected.
43
Advertisement
Table of Contents
