Uwatec Xtender Instruction Manual page 51

• If a decompression stop violation warning is issued even once, the
decompression stop violation is saved in log data.
• When the dive computer is in the decompression stop violation state, even if a
depth of 1.4 m or less is detected and the dive computer detects that the E key
is OFF, the display will continue to indicate a decompression stop violation
(until the log is finalized).
• When the surface interval exceeds 10 minutes while the dive computer is in the
decompression stop violation state and while at a depth of 1.4 m or less, the
dive computer assumes the decompression stop violation lock state (the state
is locked at the time the log is finalized). The display segment flashes and Dive
mode cannot be accessed until a surface interval of 48 hours has elapsed. If
the E key is pressed in this state, an audible alarm sounds,
indicating that the dive computer is locked in the current state.The
decompression stop violation display is unlocked and normal operations are
restored after a surface interval of 48 hours has elapsed, or if the C key and
D key are simultaneously pressed and held for approximately 15 seconds in
Time mode.
< Warning displays >
49