Surface Interval Display Function P63; Desaturation Time Display Function; Pgt Level And Oxygen Limited Indicator Display Function; Jump Function - Uwatec Xtender Instruction Manual

4-6. Surface interval display function
• After accessing Time mode from Dive mode, the display is invoked by a time
demand.
• Measurement range: 0:00 – 48:00
• One minute after the elapse of 48:00, a bar display "- -:- -" appears.
• Time Set mode, Dual Time Set mode, Dive Set mode (except by default),
History Clear mode, and PC Transfer mode cannot be accessed nor can the
dual time setting be changed until a surface interval of 10 minutes has
elapsed.

4-7. Desaturation time display function

• After accessing Time mode from Dive mode, the display is invoked by a time
demand.
• The desaturation time display is updated every minute on the minute or when
the altitude rank changes based on altitude measurements.
• After the last 0:00 data is received, the desaturation time display columns show
bars "– – : – – " after one minute has elapsed.

4-8. PGT level and oxygen limited indicator display function

• Displays the PGT and OLI bar graphs.
• When the altitude rank changes on the basis of altitude measurements, and
when PGT and OLI are displayed, the display is updated every minute on the
minute.
• The PGT gas level graph and the oxygen limited indicator graph are not dis-
played in Time Set mode, Alarm Set mode, Dual Time Set mode, Log mode,
the history screens in Log mode, History Clear mode, Dive Profile mode, or PC
Transfer mode.
• Logged data is displayed on Screens 1, 2, and 3 of Log mode.

4-9. Jump function

• The dive computer jumps to Time mode when the mode is changed by press-
63