Leaving The Dive-Plan-Mode - Uwatec Aladin Air z Operating Manual

6 Leaving the Dive-Plan-Mode

depth dive time
DIVEPLAN
DECOSTOP
m
max. depth deco info
3 s
or after 3 minutes
depth dive time
max. depth deco info
VI Uwatec Aladin Air Z
® ®
If the contacts B and E are touched for about 3 seconds, Aladin
to ready- or surface-mode. This also occurs three minutes after the activation
of the dive-plan-mode.
On a short touch of contacts B and E the Aladin
back to the scrolling no-stop times.
In order to completely leave the dive-plan-mode, B and E must be
bridged for a longer period and 2 bleeps have to be awaited.
If two or more divers plan a dive, planning has to be based on the dive com-
puter that shows the shorter no-stop times or the longer decompression times.
VI
® Air Z returns
® Air Z switches
71