Alarm Mode - Uwatec Xtender Instruction Manual

Wrist dive computer
Hide thumbs Also See for Xtender:
Table of Contents

Advertisement

d) Adjusting the year display
The year can be set from 2003 up to 2050. (After passing 2050, the year
display loops back to 2003.) Leap years are automatically detected.
(3) Carrying of numbers during adjustments
• Numbers are carried over normally.
• Except when the seconds setting is being adjusted, numbers are not carried
over to the next highest place during adjustments. For example, when the D
key is used to adjust the minutes setting from 59 minutes to 00 minutes, the
hour column is not changed. Or, when the D key is used to adjust the hour set-
ting from 23 hours to 0 hours, the day does not change.
(4) Selecting the 12- or 24-hour clock
• Either a 12-hour clock format or a 24-hour clock format can be selected.
Toggle between the 12-hour and 24-hour clock formats by pressing the D key.
• In the 12-hour format, an "A" appears from the hours of 12:00 a.m. to 11:59
a.m., and a "P" appears from the hours of 12:00 p.m. to 11:59 p.m.
(5) Full illumination function
• Simultaneously pressing the C and D keys causes the entire display to light
up.
• The dive computer does not automatically return to Time mode from the fully
illuminated screen.
• Pressing any key while the screen is fully illuminated invokes Time mode.

3-3. Alarm mode

• Alarm mode turns the daily alarm and time tone ON/OFF.
• All display segments flash when locked in the out-of-range state or when
locked in the decompression stop violation state
3-3-1. Display
11

Advertisement

Table of Contents
loading

Table of Contents