Mantis As A Dive Computer; Settings In The Dive Mode At Surface - Uwatec MANTIS User Manual

The log book will present the start time
and date on the main page. By pressing
the SEL button you can review (see display
below) the distance (1238m), exercise time
(38 minutes 53 seconds) and average heart
rate (128 beats/minute).
20
4. MANTIS AS A DIVE
COMPUTER
MANTIS is a full-featured diving computer,
capable of multigas Nitrox decompression
calculations, CCR mode,
calculations and warnings. The logbook can
store up to 50 hours of dive profiles with a
4s sampling rate. During the dive MANTIS
displays information such as depth, dive time,
decompression status, water temperature
and much more. On the surface after a
dive, remaining desaturation time, no-fly
time, surface interval and prohibited altitude
classes are shown in addition to the watch
functions.
4.1 Settings in the dive mode
at surface
When MANTIS is in surface mode, you can
access various menus dedicated to diving and
customize various settings to your liking.
The dive computer functions of MANTIS on
the surface include, among others, setting the
oxygen concentration for Nitrox diving, setting
the MB level of the decompression algorithm,
setting various warnings and personal
preferences. To reach any of these functions,
MANTIS must be in Dive surface mode
display. This can be reached from the time of
day display by pressing -/DOWN button twice.
ascent rate
MANTIS USER MANUAL