Dive Surface Mode Display - Uwatec Meridian Manual

Table of Contents

Advertisement

2. Meridian as a watch
6 hours of diving and 22 dives have been 
done with this Meridian.
By  pressing  +/UP  or  –/DOWN  buttons 
you can scroll the dives in the memory. In 
SCUBA mode there is a main page showing 
maximum  depth,  dive  time,  dive  date,  log 
number and used Gas 1 oxygen mix.
Max depth
Dive number
If  the  dive  has  been  done  in  GAUGE  or 
APNEA modes, the main page has GA or 
AP instead of O
By  pressing  SEL/ESC  you  will  select 
the  dive  and  get  to  the  sub  display.  The 
information on the display varies depending 
on the mode of dive:
• Scuba mode: Minimum temperature,
dive start time and average heart rate (if
enabled).
• APNEA mode: The bottom row will
show the maximum ascent rate.
• GAUGE mode: The bottom row will
show the average depth.
2.1.5
Dive surface mode display
This  display  is  the  starting  point  of  dive 
functions  and  sub  menus  related  to 
underwater  options.  This  is  described  in 
detail  in  the  following  section  3 Meridian
as a dive computer.
20
Dive time
Dive date
O
 mix
2
% at the bottom row.   
2
SCUBAPRO MERIDIAN

Advertisement

Table of Contents
loading

Table of Contents