Table of Contents
Advertisement
3-11-3. Description of Dive Profile mode functions
(1) Memory recall function
• Displays depth data and dive time saved in Dive mode at intervals determined
by the profile time set.
• The following log data is also displayed in the log saved in that profile. (Data
limits are the same as those in Dive Log mode.)
0 FO2
0 Log No.
• Data for a maximum of 30 profiles and logs is saved in memory. Once the 30
profile/log limit is reached, the oldest log/profile data is automatically cleared.
• Even if the 30 logs/profiles limit has not been reached, the oldest log/profile
data is automatically cleared when there is no more available space in
memory.
• When Dive Profile mode is accessed, the first profile in the new log is dis-
played. For example, if memory contains logs 1 through 13, then the first profile
of log 13 is displayed.
• The profile display is automatically updated every 2 seconds in the direction
that the dive time advances. It stops the last profile of that log is displayed.
• Each time the display is automatically updated, the DIVE.T flag flash.
• Press the C key to switch to another log.
(newest) 30 ¡ 29 ¡ ¡ 2 ¡ 1 (oldest) ¡ 30 (newest) ¡ 29 ¡ (loop)
• If the log data changes, the first profile of that log is displayed.
• Press and hold the C key to fast-forward to the first profile of each log. When
fast-forwarding through the logs, the dive computer stops once at the oldest log
(No. 1).
30 ¡ 29 ¡ ¡ 2 ¡ 1 (stops temporarily here) ¡ 30 ¡ 29 ¡ (loop)
• Automatic switching of the profile is halted while the D key is held down.
• If an EEPROM access error occurs, and if there is no log data, a bar display
will appear when Dive Profile mode is accessed.
• When the bar display appears, PC Transfer mode cannot be accessed.
36
0 NX flag (for nitrox dives)
Advertisement
Table of Contents
