® WARNING turn on with a delay of up to 1 minute into the dive. This will affect functioning of the instrument. Make sure that the instrument is on before starting the dive. I UWATEC Aladin GAUGE ® ®...
• Bookmarks • Atmospheric pressure • Battery condition • Dive profile • Average depth When making any changes to the settings via SmartTRAK, you must press the "Write" icon for the changes to take effect. II UWATEC Aladin GAUGE ® ®...
• Sound on / off ->16 • Electronic ID ->16 • With you can switch to the time of day display. • After 3 minutes without operation Aladin returns to the time of day display. ® II UWATEC Aladin GAUGE ® ®...
Diving not possible and settings are disabled interpretation Aladin marks dives started with 3 or less segments in the logbook with the ® battery symbol. Logbook information is not lost even when the battery is removed for a long time. II UWATEC Aladin GAUGE ® ®...
If the alarm clock is "on", the time of day display shows When alarm is triggered: flashes and special attention beeps are played for 30 seconds or until the user presses a button. Setting the alarm clock: ->14 ("set 2") II UWATEC Aladin GAUGE ® ®...
DIVE TIME DEPTH DIVE TIME shows " – – – ". Depth measurement is based on salt water. Therefore, Aladin ® Current depth shows a slightly shallower depth than actual when diving in fresh water. III UWATEC Aladin GAUGE ® ®...
After 5 minutes the dive is closed and it is entered into the logbook. The time of day and the no-fly time are then displayed for 3 minutes, after which the instrument turns off. The no-fly time after diving is 48 hours. No-fly time Do not fly icon III UWATEC Aladin GAUGE ® ®...
At the end of the logbook Aladin ® displays statistic information ->12. Aladin displays further ® information about the selected dive. Page 2 Repetitive dive number DESAT Starting time Minimum temperature Push to get more information about the dive. IV UWATEC Aladin GAUGE ® ®...
Page 12
Deepest dive DEPTH DIVE TIME Longest dive Cumulative bottom time Number of dives Leaving the logbook By pushing once or twice you can exit the logbook. The logbook closes automatically after 3 minutes without operation. IV UWATEC Aladin GAUGE ® ®...
1. Confirm that you wish to change the setting of the water contacts by pushing . "On" or "off" starts to flash. 2. Switch between "on" or "off" by pressing . (default "on") 3. Confirm the setting with V UWATEC Aladin GAUGE ® ®...
The hours start to flash. 2. Set the hours by pushing Time of day 3. Confirm the setting with . The minutes start to flash. 4. Set the minutes by pushing 5. Confirm the setting with V UWATEC Aladin GAUGE ® ®...
Page 15
1. Confirm that you wish to change the IrDA speed by pushing . "Lo" (low) or "hi" (high) starts to flash. 2. Switch with between low and high. 3. Confirm the setting with Low: 9600 bits / second High: max. 57 600 bits / second V UWATEC Aladin GAUGE ® ®...
Page 16
Setting the "sound" to "off" applies also to the wake up alarm. Showing the hardware electronic ID of Aladin ® This number is needed when reporting problems or for other maintenance related issues. ID Number V UWATEC Aladin GAUGE ® ®...
All error codes other than E3: Aladin must not be used for any further dives. ® Take your dive instrument to an authorized SCUBAPRO UWATEC dealer. 2.1 Replacing the battery (Battery kit 06.201.919 includes battery and Teflon coated o-ring) Removing the battery clears the no-fly time.
Page 18
If necessary, clean the parts with a soft cloth. Fit the o-ring in the o-ring groove of the battery cap. 7. Use only an original UWATEC o-ring PN 06.201.610. This o-ring is Teflon WARNING coated and does not require additional lubrication.
In order to put forward a warranty claim: send the dive instrument together with a dated receipt of the purchase to your authorised retailer or an authorised servicing point. UWATEC reserves the right to determine the merits of a warranty claim and to determine whether the instrument will be repaired or replaced.
Page 20
+33 (0) 4 92 91 30 30 f: +1 619 402 1554 f: +33 (0) 4 92 91 30 31 www.scubapro.com www.scubapro-uwatec.fr SCUBAPRO UWATEC Asia Pacific SCUBAPRO UWATEC Benelux 1208 Block A, MP Industrial Center Avenue des Arts, 10/11 Bte 13 18 Ka Yip St.
Need help?
Do you have a question about the Aladin Gauge and is the answer not in the manual?
Questions and answers