Table of Contents
Advertisement
3-7-3. Description of Dive Plan mode functions
(1) Depth rank selection function
• Each time the C key is pressed, 3 m (10 ft) is added [from 9 m (30 ft) up to 48
m (160 ft)].
9 m (30 ft) ¡ 12 m (40 ft) ¡ ¡ 45 m (150 ft) ¡ 48 m (160 ft) (no loop)
• Each time the D key is pressed, 3 m (10 ft) is subtracted [from 48 m (160 ft) up
to 9 m (30 ft)]
48 m (160 ft) ¡ 45 m (150 ft) ¡ ¡ 12 m (40 ft) ¡ 9 m (30 ft) (no loop)
• Holding the keys down does not speed up adjustments.
• After Dive Plan mode is accessed, the display always starts from 9 m (30 ft)
(display order 1)
• As shown in the following table, there are 14 depth ranks.
Display
Depth Rank
Order
1
2
12 m (40 ft)
3
15 m (50 ft)
4
18 m (60 ft)
5
21 m (70 ft)
(2) Dive plan function
• Used to set the depth rank data and to check the non-decompression limit
(NDL) for the first dive and for repetitive dives at that depth rank.
• However, if PO2 reaches or exceeds 1.4, the bar display shows "- - -".
(3) m/ft selector function
• Press and hold the B key for approximately 15 seconds to toggle the depth and
Display
Order
9 m (30 ft)
6
7
8
9
10
Depth Rank
Display
Order
24 m (80 ft)
11
27 m (90 ft)
12
30 m (100 ft)
13
33 m (110 ft)
14
36 m (120 ft)
Depth Rank
39 m (130 ft)
42 m (140 ft)
45 m (150 ft)
48 m (160 ft)
21
Advertisement
Table of Contents
