Radius-Server Retransmit - Cisco CRS User Manual

radius-server retransmit

radius-server retransmit
To specify the number of times the Cisco IOS XR software retransmits a packet to a server before giving up,
use the radius-server retransmit command. The no form of this command sets it to the default value of 3 .
radius-server retransmit {retries disable}
no radius-server retransmit {retries disable}
Syntax Description
retries
disable
Command Default
The RADIUS servers are retried three times, or until a response is received.
Command Modes
Global configuration mode
Command History
Release
Release 3.2
Usage Guidelines
The RADIUS client tries all servers, allowing each one to time out before increasing the retransmit count.
Task ID
Task ID
aaa
Examples
This example shows how to specify a retransmit counter value of five times:
RP/0/RP0/CPU0:router# configure
RP/0/RP0/CPU0:router(config)# radius-server retransmit 5
Related Commands
Command
radius-server key , on page 51
Cisco IOS XR System Security Command Reference for the Cisco CRS Router, Release 4.1
52
Maximum number of retransmission attempts. The range is from 1 to 100.
Default is 3.
Disables the radius-server transmit command.
Modification
This command was introduced.
Operations
read, write
Description
Sets the authentication and encryption key for all
RADIUS communications between the router and the
RADIUS daemon.
Authentication, Authorization, and Accounting Commands
OL-24740-01