How To Set The Frequency Reference; Select - ABB ACS150 User Manual

50

How to set the frequency reference

You can set the local frequency reference with the integrated potentiometer in any
mode when the drive is in local control if parameter
the default value 0 (POT).
If parameter
you can use keys
the Reference mode (see page 52).
To view the current local reference, you have to go to the Reference mode.
Step Action
1. If the drive is in remote control (REM shown on the left), switch to local
control by pressing
to local control.
Note: With group
remote (external) reference in remote control (REM) e.g. using the
integrated potentiometer or keys
2. • To increase the reference value, rotate the integrated potentiometer
clockwise.
• To decrease the reference value, rotate the integrated potentiometer
counterclockwise.
Control panel
1109 LOC REF SOURCE has been changed to 1 (KEYPAD), so that
and
. The display briefly shows "LoC" before switching
LOC
REM
11 REFERENCE SELECT, you can allow changing of the
and
1109
for setting the local reference, you have to do it in
.
LOC REF SOURCE has
Display
PAr S
LOC
MENU FWD