Ref2 Select - ABB ACS150 User Manual

4
Default parameter values with PID Control macro (EN page 65)
New actual signals (EN page 70)
Actual signals
No. Name/Value
01 OPERATING DATA
0126 PID 1 OUTPUT
0128 PID 1 SETPNT
0130 PID 1 FBK
0132 PID 1 DEVIATION
Update notice
Index Name/Selection
1001 EXT1 COMMANDS
1002 EXT2 COMMANDS
1003 DIRECTION
1102 EXT1/EXT2 SEL
1103 REF1 SELECT
1106

REF2 SELECT

1201 CONST SPEED SEL
1301 MINIMUM AI1
1601 RUN ENABLE
2201 ACC/DEC 1/2 SEL
9902 APPLIC MACRO
Description
Basic signals for monitoring the drive (read-only)
Output value of the process PID1 controller in percent
Setpoint signal (reference) for the process PID1 controller. Unit depends on parameter
4006 UNITS and
Feedback signal for the process PID1 controller. Unit depends on parameter
UNITS and 4007
Deviation of the process PID1 controller, i.e. the difference between the reference value
and the actual value. Unit depends on parameter
PID CONTROL
1 = DI1
20 = DI5
1 = FORWARD
2 = DI2
2 = POT
19 = PID1OUT
3 = DI3
20%
4 = DI4
0 = NOT SEL
6 = PID CONTROL
4007 UNIT SCALE settings.
UNIT SCALE settings.
4006 UNITS and 4007 UNIT SCALE.
4006