Select - ABB ACS150 User Manual

76
Parameters in the Long Parameter mode
Index Name/Selection
1104 REF1 MIN
0.0...500.0 Hz
1105 REF1 MAX
0.0...500.0 Hz
1106 REF2 SELECT
0 = KEYPAD
1 = AI1
2 = POT
3 = AI1/JOYST
5 = DI3U,4D(R)
6 = DI3U,4D
11 = DI3U,4D(RNC)
12 = DI3U,4D(NC)
14 = AI1+POT
16 = AI1-POT
30 = DI4U,5D
31 = DI4U,5D(NC)
32 = FREQ INPUT
1107 REF2 MIN
0.0...100.0%
1108 REF2 MAX
0.0...100.0%
1109 LOC REF SOURCE
0 = POT
1 = KEYPAD
Actual signals and parameters
Description
Defines the minimum value for external reference REF1. Corresponds to the
minimum setting of the used source signal.
Minimum value.
Example: Analog input AI1 is selected as the reference source (value of
parameter 1103 REF1 SELECT is AI1). The reference minimum and
maximum correspond to the
settings as follows:
REF (Hz)
1105
(MAX)
1104
(MIN) AI1 signal (%)
1302
1301
Defines the maximum value for external reference REF1. Corresponds to the
maximum setting of the used source signal.
Maximum value. See example in parameter
Selects the signal source for external reference REF2.
See parameter 1103 REF1 SELECT.
See parameter 1103 REF1 SELECT.
See parameter 1103 REF1 SELECT.
See parameter 1103 REF1 SELECT.
See parameter 1103 REF1 SELECT.
See parameter 1103 REF1 SELECT.
See parameter 1103 REF1 SELECT.
See parameter 1103 REF1 SELECT.
See parameter 1103 REF1 SELECT.
See parameter 1103 REF1 SELECT.
See parameter 1103 REF1 SELECT.
See parameter 1103 REF1 SELECT.
See parameter 1103 REF1 SELECT.
Defines the minimum value for external reference REF2. Corresponds to the
minimum setting of the used source signal.
Value in percent of the maximum frequency. See example in parameter
REF1 MIN for correspondence to the source signal limits.
Defines the maximum value for external reference REF2. Corresponds to the
maximum setting of the used source signal.
Value in percent of the maximum frequency. See example in parameter
REF1 MIN for correspondence to the source signal limits.
Selects the source for the local reference.
Potentiometer
Control panel
1301 MINIMUM AI1 and 1302
REF (Hz)
1104
(MIN)
1105
(MAX)
1301
1104 REF1 MIN.
Def
0
MAXIMUM AI1
AI1 signal (%)
1302
Eur: 50 /
US: 60
2 = POT
0
1104
100
1104
0 = POT