Fault tracing
What this chapter contains
The chapter lists all alarm and fault messages including the possible cause and
corrective actions.
Safety
WARNING! Only qualified electricians are allowed to maintain the drive. Read the
safety instructions in chapter
Alarm and fault indications
An alarm or fault message on the panel display indicates abnormal drive status.
Using the information given in this chapter most alarm and fault causes can be
identified and corrected. If not, contact an ABB representative.
How to reset
The drive can be reset either by pressing the keypad key
through digital input, or by switching the supply voltage off for a while. When the fault
has been removed, the motor can be restarted.
Fault history
When a fault is detected, it is stored in the fault history. The latest faults are stored
together with a time stamp.
Parameters
FAULT 2 store the most recent faults. Parameters
data at the time the latest fault occurred.
Safety
0401
LAST FAULT,
0412
on the first pages before you work on the drive.
PREVIOUS FAULT 1 and
0404...0409
105
on the control panel,
0413
PREVIOUS
show drive operation
Fault tracing