Installing The Fork Protector; Removing The Fork Legs - Husqvarna FC 250 Owner's Manual

11 SERVICE WORK ON THE CHASSIS
11.6
11.7
48

Installing the fork protector

S01902-11

Removing the fork legs

S01903-10
S02013-10
–
Position the fork protector on the left fork leg. Mount and
1
tighten screws .
Guideline
Remaining screws,
chassis
–
Position the brake line and clamp. Mount and tighten
2
screws .
–
Position the fork protector on the right fork leg. Mount and
3
tighten screws .
Guideline
Remaining screws,
chassis
Preparatory work
–
Raise the motorcycle with a lift stand. (
–
Remove the front wheel.
Main work
–
1
Remove screws and take off the clamp.
–
2
Remove screws and take off the brake caliper.
–
Allow the brake caliper and brake line to hang tension-free to
the side.
Info
Do not pull the hand brake lever when the front wheel
is removed.
–
3
Loosen screws . Take out the left fork leg.
–
4
Unscrew screws . Take out the right fork leg.
M6 10 Nm (7.4 lbf ft)
M6 10 Nm (7.4 lbf ft)
p. 46)
( p. 94)