Installing The Lower Triple Clamp - Husqvarna FC 250 Owner's Manual

11 SERVICE WORK ON THE CHASSIS
11.10
50
S02014-10
S01907-10

Installing the lower triple clamp

102146-10
Main work
–
Remove the holder with the malfunction indicator lamp.
–
1
Open cable holder on the left and detach the wiring har-
ness.
–
2
Remove screw .
–
3
Remove screw .
–
Take off the upper triple clamp with the handlebar and set it
aside.
Info
Cover the components to protect them against dam-
age.
Do not kink the cables and lines.
–
4
Remove O-ring . Remove protective ring
–
Take off the lower triple clamp with the steering stem.
–
Remove the upper steering head bearing.
Main work
–
Clean the bearing and sealing elements, check for damage,
and grease.
High viscosity grease (
–
Insert the lower triple clamp with the steering stem. Mount
the upper steering head bearing.
–
Check whether upper steering head seal
tioned.
–
2
Slide on protective ring
5
.
p. 139)
1
is correctly posi-
3
and O-ring .