Husqvarna FC 250 Owner's Manual page 83

Info
Never use DOT 5 brake fluid. It is silicone-based and purple in color. Oil seals and brake lines are not
designed for DOT 5 brake fluid.
Avoid contact between brake fluid and painted parts. Brake fluid attacks paint.
Only use clean brake fluid from a sealed container.
F00061-10
H02360-10
Preparatory work
–
Check the front brake linings. (
Main work
(Option: Brembo)
–
Move the brake fluid reservoir mounted on the handlebar
to a horizontal position.
–
1
Remove screws .
–
2
Remove cover with membrane
–
Add brake fluid to level
Guideline
A
Level (brake fluid level
below reservoir rim)
Brake fluid DOT 4 (
–
Position the cover with the membrane. Mount and tighten
the screws.
Info
Clean up overflowed or spilled brake fluid immedi-
ately with water.
(Option: Magura)
–
Move the brake fluid reservoir mounted on the handlebar
to a horizontal position.
–
1
Remove screws .
–
2
Remove cover with membrane
–
Add brake fluid to level
Guideline
A
Level (brake fluid level
below reservoir rim)
Brake fluid DOT 4 (
–
Position the cover with the membrane. Mount and tighten
the screws.
Info
Clean up overflowed or spilled brake fluid immedi-
ately with water.
12 BRAKE SYSTEM
p. 82)
3
.
A
.
5 mm (0.2 in)
p. 137)
3
.
A
.
5 mm (0.2 in)
p. 137)
81