Changing The Mapping; Adjusting The Idle Speed - Husqvarna FC 250 Owner's Manual

16.4

Changing the mapping

Info
The desired engine characteristic can be activated via the MAP button on the combination switch.
The setting most recently selected is activated again when restarting.
The traction control can also be activated in each mapping using the TC button.
The mapping can also be changed during the ride.
16.5

Adjusting the idle speed

Danger
Danger of poisoning Exhaust gases are toxic and inhaling them may result in unconsciousness and
death.
–
Always make sure there is sufficient ventilation when running the engine.
–
Use an effective exhaust extraction system when starting or running the engine in an enclosed
space.
Warning
Danger of accidents The engine may go out spontaneously if the idle speed is set too low.
–
Set the idle speed to the specified value. (Your authorized Husqvarna Motorcycles workshop will be
glad to help.)
Activating STANDARD mapping:
–
Press button MAP until LED1 lights up.
Guideline
Engine speed
STANDARD – balanced response
H01180-10
Activating ADVANCED mapping:
–
Press button MAP until LED2 lights up.
Guideline
Engine speed
ADVANCED – direct response
H01180-11
16 TUNING THE ENGINE
< 4,000 rpm
< 4,000 rpm
113