Adding Engine Oil - Husqvarna FC 250 Owner's Manual

17 SERVICE WORK ON THE ENGINE
17.4
120

Adding engine oil

Info
Too little engine oil or poor-quality engine oil results in premature wear of the engine.
S00931-10
Danger
Danger of poisoning Exhaust gases are toxic and
inhaling them may result in unconsciousness and
death.
–
Always make sure there is sufficient ventilation
when running the engine.
–
Use an effective exhaust extraction system when
starting or running the engine in an enclosed
space.
–
Start the engine and check that it is oil-tight.
Finishing work
–
Check the engine oil level. (
Main work
–
1
Remove oil filler plug
cover.
–
Fill engine oil to the middle
–
Add the same engine oil that was used when the last oil
change was carried out.
Engine oil (SAE 10W/50) (
Info
For optimal performance of the engine oil, do not mix
different types of engine oil.
We recommended changing the engine oil when nec-
essary.
–
Install and tighten the oil filler plug with O-ring.
Danger
Danger of poisoning Exhaust gases are toxic and
inhaling them may result in unconsciousness and
death.
–
Always make sure there is sufficient ventilation
when running the engine.
–
Use an effective exhaust extraction system when
starting or running the engine in an enclosed
space.
–
Start the engine and check that it is oil-tight.
Finishing work
–
Check the engine oil level. (
p. 117)
with the O-ring from the clutch
A
of the level viewer.
p. 137)
p. 117)