Husqvarna FC 250 Owner's Manual page 53

11 SERVICE WORK ON THE CHASSIS
–
Position the upper triple clamp with the handlebar.
–
Mount screw
S02015-10
–
Position the fork legs.
Air release screw
the front.
A
Valve
Info
Grooves are milled into the side of the upper end of
the fork legs. The second milled groove (from the top)
must be flush with the top edge of the upper triple
H01182-11
clamp.
The air suspension is located in the left fork leg. The
pressure and rebound damping is located in the right
fork leg.
–
Tighten screws
Guideline
Screw, bottom triple
clamp
S02016-10
–
Tighten screw
Guideline
Screw, top steering
head
S02017-10
–
Mount and tighten screw
Guideline
Screw, top
steering stem
S02018-10
4
but do not tighten yet.
5
of the right fork leg is positioned to
of the left fork leg faces the front.
6
.
M8 12 Nm (8.9 lbf ft)
4
.
M20x1.5 12 Nm (8.9 lbf ft)
7 .
M8 20 Nm (14.8 lbf ft)
®
Loctite 243™
51