Installing The Fork Protector; Removing The Fork Legs - Husqvarna FS 450 2020 Owner's Manual

11 SERVICE WORK ON THE CHASSIS
11.6
11.7
46

Installing the fork protector

F00408-11

Removing the fork legs

F00429-10
V01431-10
–
Position the fork protector on the left fork leg. Mount and
1
tighten screws .
Guideline
Remaining screws,
chassis
–
Position the brake line and clamp. Mount and tighten
2
screws .
–
Position the fork protector on the right fork leg. Mount and
3
tighten screws .
Guideline
Remaining screws,
chassis
Preparatory work
–
Raise the motorcycle with a lift stand. (
–
Remove the front wheel.
Main work
–
1
Remove screws and take off the clamp.
–
Allow the brake caliper and brake line to hang loosely to the
side.
–
2
Loosen screws . Remove the left fork leg.
–
3
Loosen screws . Remove the right fork leg.
M6 10 Nm (7.4 lbf ft)
M6 10 Nm (7.4 lbf ft)
p. 44)
( p. 87)