Checking The Brake Linings Of The Rear Brake - Husqvarna FC 250 Owner's Manual

Info
Never use DOT 5 brake fluid. It is silicone-based and purple in color. Oil seals and brake lines are not
designed for DOT 5 brake fluid.
Avoid contact between brake fluid and painted parts. Brake fluid attacks paint.
Only use clean brake fluid from a sealed container.
12.12

Checking the brake linings of the rear brake

Warning
Danger of accidents Worn-out brake linings reduce the braking effect.
–
Ensure that worn-out brake linings are replaced immediately. (Your authorized Husqvarna Motorcy-
cles workshop will be glad to help.)
Preparatory work
–
Check the brake linings of the rear brake. (
Main work
(Option: Brembo)
–
Stand the vehicle upright.
–
Remove screw cap
ring.
–
Add brake fluid to level
Brake fluid DOT 4 (
–
Mount and tighten the screw cap with the membrane and
F00085-10
O-ring.
Info
Clean up overflowed or spilled brake fluid immedi-
ately with water.
(Option: Magura)
–
Stand the vehicle upright.
–
Remove the cable ties on the frame protector.
–
Remove screw cap
–
Add brake fluid to level
Brake fluid DOT 4 (
–
Mount and tighten screw cap with the membrane and the
shim.
H02366-10
Info
Clean up overflowed or spilled brake fluid immedi-
ately with water.
12 BRAKE SYSTEM
p. 89)
1 2
with membrane and the O-
A
.
p. 137)
1 2
with membrane and the shim.
A
.
p. 137)
89