Checking For Chain Dirt Accumulation; Cleaning The Chain - Husqvarna FC 250 Owner's Manual

11 SERVICE WORK ON THE CHASSIS
11.34
11.35
68
S02040-11
S02038-11

Checking for chain dirt accumulation

400678-01

Cleaning the chain

Warning
Danger of accidents Oil or grease on the tires reduces the road grip.
–
Remove the lubricant from the tires using a suitable cleaning agent.
–
Mount and tighten screws
Guideline
Remaining screws,
chassis
–
3
Plug in connector for the fuel pump.
–
Remove the wash cap set and thoroughly clean the plug-in
connection of the fuel line using compressed air.
Info
Under no circumstances should dirt enter into the fuel
line. Dirt in the fuel line clogs the injection valve!
–
Lubricate the O-ring and connect plug-in connection
the fuel line.
Info
Route the cable and fuel line at a safe distance from
the exhaust system.
Finishing work
–
Mount the seat. ( p. 60)
–
Install the air filter box cover. (
–
Install the right side cover. (
–
Check the chain for coarse dirt accumulation.
» If the chain is very dirty:
–
Clean the chain. (
2
.
M6 10 Nm (7.4 lbf ft)
p. 61)
p. 65)
p. 68)
4
for