11 SERVICE WORK ON THE CHASSIS
11.6
11.7
42
S01483-10
Installing the fork protector
S01483-11
S01482-11
Removing the fork legs
S01484-10
–
3
Remove screws
on the right fork leg. Take off the fork
protector.
–
Position fork protector on the right fork leg. Mount and
1
tighten screws
.
Guideline
Remaining screws,
chassis
–
Position fork protector on left fork leg. Mount and tighten
2
screws
.
Guideline
Remaining screws,
chassis
–
Position the brake line and the clamp. Mount and tighten
3
screws
.
Guideline
Screw, brake line
bracket
Preparatory work
–
Raise the motorcycle with a lift stand. (
–
Remove the front wheel.
Main work
–
1
Remove screws
and take off the clamp.
–
2
Remove screws
and take off the brake caliper.
–
Allow the brake caliper and brake line to hang loosely to the
side.
Info
Do not kink the brake line.
M6
10 Nm (7.4 lbf ft)
M6
10 Nm (7.4 lbf ft)
EJOT
1.7 Nm (1.25 lbf ft)
p. 40)
(
p. 86)