14 ELECTRICAL SYSTEM
14.2
14.3
102
Installing the battery
H00388-10
Recharging the battery
Warning
Risk of injury Batteries contain harmful substances.
–
Keep batteries out of the reach of children.
–
Keep sparks and open flames away from the batteries.
–
Only charge batteries in well-ventilated rooms.
–
Maintain a minimum clearance from inflammable materials when charging batteries.
Minimum clearance
–
Do not charge deeply discharged batteries if charge is already below the minimum voltage.
Minimum voltage before the start of the charge
–
Dispose of batteries with less than the minimum voltage correctly.
Main work
–
Position the battery in the battery compartment with the ter-
minals facing forward, and secure with holding bracket
Battery (HJTZ5S-FP) (
–
Mount and tighten screw
Guideline
Screw, battery sup-
port bracket
Info
A
Contact disks
and cable sockets
tery terminal.
–
5
Connect positive cable
Guideline
Screw, battery termi-
nal
–
Slide positive terminal cover
–
7
Connect negative cable
Guideline
Screw, battery termi-
nal
–
Slide negative terminal cover
Finishing work
–
Mount the seat. (
p. 60)
–
Install the air filter box cover. (
1 m (3 ft)
9 V
p. 133)
2
.
M6
10 Nm (7.4 lbf ft)
must be mounted under screws
4
with the claws toward the bat-
to the battery.
M5
2.5 Nm (1.84 lbf ft)
6
over the positive terminal.
to the battery.
M5
2.5 Nm (1.84 lbf ft)
8
over the negative terminal.
p. 61)
1
.
3