Security - GE C60 Instruction Manual

2.1 INTRODUCTION
2
Table 2–2: OTHER DEVICE FUNCTIONS
FUNCTION
Breaker Arcing Current (I
Breaker Control
Breaker Flashover
Breaker Restrike
Contact Inputs (up to 96)
Contact Outputs (up to 64)
Control Pushbuttons
CyberSentry™ security
Data Logger
Demand
Digital Counters (8)
Digital Elements (48)
Direct Inputs/Outputs (32)
Disconnect Switches
The following security features are available:
• Password security — Basic security present in the default offering of the product
• EnerVista security — Role-based access to various EnerVista software screens and configuration elements. The fea-
ture is available in the default offering of the product and only in the EnerVista software.
2-2
Figure 2–1: SINGLE LINE DIAGRAM
FUNCTION
2
t) Event Recorder
DNP 3.0 or IEC 60870-5-104
Communications
Fault Detector and Fault Report
FlexElements™ (8)
FlexLogic Equations
IEC 60870-5-103 Communications
(optional)
IEC 61850 Communications (optional)
Metering: Current, Voltage, Power,
Energy, Frequency
Modbus Communications
Modbus User Map
Non-Volatile Latches
Non-Volatile Selector Switch
Oscillography
Open Pole Detector
C60 Breaker Protection System
2 PRODUCT DESCRIPTION
FUNCTION
Setting Groups (6)
Synchrophasors (PMU)
Time synchronization over IRIG-B or
IEEE 1588
Time Synchronization over SNTP
Transducer Inputs/Outputs
User Definable Displays
User Programmable LEDs
User Programmable Pushbuttons
User Programmable Self-Tests
Virtual Inputs (64)
Virtual Outputs (96)
VT Fuse Failure

2.1.2 SECURITY

GE Multilin