5.4 SYSTEM SETUP
a) MAIN MENU
PATH: SETTINGS
SYSTEM SETUP
PHASOR MEASUREMENT
UNIT
The C60 is provided with an optional phasor measurement unit feature. This feature is specified as a soft-
ware option at the time of ordering. The number of phasor measurement units available can also depend
on this option. Using the order code for your device, see the order codes in chapter 2 for details.
UR Synchrophasor Implementation
5
are used within protection relays. If these phasors are referenced to a common time base they are referred to as
PHASORS
a
. A vastly improved method for tracking power system dynamic phenomena for improved power system
SYNCHROPHASOR
monitoring, protection, operation, and control can be realized if Synchrophasors from different locations within the power
system are networked to a central location.
The C60 offers PMU features over two communication standards, IEC 61850-9-5 and IEEE C37.118. The figure shows
complete Synchrophasor implementation.
UR Implementation of IEC 61850-90-5
5-122
PHASOR MEASUREMENT UNIT 1(2)
PHASOR MEASUREMENT
UNIT 1
PHASOR MEASUREMENT
MESSAGE
UNIT 2
AGGREGATOR
MESSAGE
UNIT 1
AGGREGATOR
MESSAGE
UNIT 2
IEC 90-5 MSVCB
MESSAGE
CONFIGURATION
Figure 5–41: COMPLETE SYNCHROPHASOR IMPLEMENTATION
C60 Breaker Protection System
5.4.7 PHASOR MEASUREMENT UNIT
See below.
See below.
See page 5–141.
See page 5–141.
See page 5–143.
5 SETTINGS
GE Multilin