GE C60 Instruction Manual page 35

2 PRODUCT DESCRIPTION
CYBERSENTRY USER ROLES
CyberSentry user roles (Administrator, Engineer, Operator, Supervisor, Observer) limit the levels of access to various UR
device functions. This means that the EnerVista software allows for access to functionality based on the user's logged in
role.
Example: Administrative functions can be segmented away from common operator functions, or engineering type access,
all of which are defined by separate roles, as shown in the following figure, so that access of UR devices by multiple per-
sonnel within a substation is allowed.
The table lists the roles that are supported and their corresponding capabilities.
Table 2–3: PERMISSIONS BY USER ROLE FOR CYBERSENTRY
Roles
Device Definition
Settings
|------------ Product Setup
|--------------- Security (CyberSentry)
|--------------- Supervisory
|--------------- Display Properties
Clear relay records
|--------------- (settings)
|--------------- Communications
|--------------- Modbus user map
|--------------- Real Time Clock
|--------------- Oscillography
|--------------- Data Logger
|--------------- Demand
User Programmable
|--------------- LEDs
User Programmable
|--------------- self test
|--------------- Control Pushbuttons
User programmable
|--------------- Pushbuttons
|--------------- Flex states
User definable dis-
|--------------- plays
|--------------- Direct I/O
GE Multilin
Figure 2–2: CYBERSENTRY USER ROLES
Administrator Engineer
Complete access Complete access
except for
CyberSentry
Security
R
RW
see table notes
RW
RW
RW
RW
RW
RW
RW
RW
RW
RW
RW
RW
RW
RW
RW
C60 Breaker Protection System
Operator Supervisor
Command Authorizes
menu writing
R R R
R R R
R R see table notes
RW R R
RW R R
RW R R
RW R R
RW R R
RW R R
RW R R
RW R R
RW R R
RW R R
RW R R
RW R R
RW R R
RW R R
RW R R
2.1 INTRODUCTION
2
Observer
Default role
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
2-5