Security - GE F60 Instruction Manual

2.1 INTRODUCTION
2
Table 2–2: OTHER DEVICE FUNCTIONS
FUNCTION
Breaker arcing current (I
Breaker control
Breaker flashover
Breaker restrike
Broken conductor detection
Cold load pickup
Contact inputs (up to 96)
Contact outputs (up to 64)
Control pushbuttons
CyberSentry™ security
Data logger
Demand
Digital counters (8)
Digital elements (48)
Direct inputs and outputs (32)
The following security features are available:
• Password security — Basic security present in the default offering of the product
• EnerVista security — Role-based access to various EnerVista software screens and configuration elements. The fea-
ture is available in the default offering of the product and only in the EnerVista software.
• CyberSentry security — Advanced security options available as a software option. When purchased, the options are
automatically enabled, and the default Password security and EnerVista security are disabled.
2-2
Figure 2–1: SINGLE LINE DIAGRAM
FUNCTION
2
t) Disconnect switches
Event recorder
Fault detector and fault report
Fault locator
FlexElements™ (8)
FlexLogic equations
High impedance fault detection (Hi-Z)
IEC 60870-5-103 communications
(optional)
IEC 61850 communications (optional)
Incipient cable fault detection
Load encroachment
Metering: current, voltage, power, PF,
energy, frequency, harmonics, THD
Modbus user map
Non-volatile latches
Non-volatile selector switch
F60 Feeder Protection System
2 PRODUCT DESCRIPTION
FUNCTION
Oscillography
Phasor measurement unit
Setting groups (6)
Thermal overload protection
Time synchronization over IRIG-B or IEEE
1588
Time synchronization over SNTP
Transducer inputs and outputs
User-definable displays
User-programmable LEDs
User-programmable pushbuttons
User-programmable self-tests
Virtual inputs (64)
Virtual outputs (96)
VT fuse failure

2.1.2 SECURITY

GE Multilin