Toggling Between At Once And Confirm Modes - Kramer VP-88K User Manual

im Vertrieb von
The Confirm Mode
In the Confirm mode:
• You can enter several actions and then confirm them by pressing the TAKE
button to simultaneously activate the multiple switches
• Every action requires user confirmation which protects against erroneous
switching
• Execution is delayed

7.3.1 Toggling between At Once and Confirm Modes

To toggle between the At Once and Confirm modes:
1. Press the TAKE button to toggle from the At Once mode
mode
Actions now require user confirmation and the TAKE button lights.
2. Press the TAKE button to toggle from the Confirm mode back to the At Once
mode.
Actions no longer require user confirmation and the TAKE button no longer
lights.
7.3.2 Confirming a Switching Action
To confirm a switching action (in the Confirm mode):
1. Press an output-input combination.
The corresponding input number that is displayed in the STATUS 7-segment
display flashes. The TAKE button also flashes.
2. Press the flashing TAKE button to confirm the action.
The corresponding input number that is displayed in the STATUS 7-segment
display no longer flashes. The TAKE button lights.
To confirm several actions (in the Confirm mode):
1. Press each OUTPUT-INPUT combination in sequence.
The corresponding input numbers that are displayed in the STATUS
7-segment display flash. The TAKE button also flashes.
2. Press the flashing TAKE button to confirm all the actions.
The corresponding input numbers that are displayed in the STATUS
7-segment display no longer flash. The TAKE button lights.
1 If the TAKE button is not pressed within one minute, the action is aborted
2 The TAKE button does not light
3 The TAKE button lights
www.camboard.de
CAMBOARD Electronics
Operating the VP-88K
1
until the user confirms the action
3
.
Tel. 07131 911201
Fax 07131 911203
2
to the Confirm
ce-info@camboard.de
19