Kramer VP-88K User Manual page 54

im Vertrieb von
Command
NEW_MACHINE_NUMBER @MACH-NUM OLD_MACHINE_NUMBER ,NEW_MACHINE_NUMBER OK
Set IP Address
Read IP Address
Read MAC Address
Set subnet mask
Read subnet mask
Set gateway address
Read subnet mask
Set DHCP mode
Read subnet mask
DHCP_MODE =
0 – Don't use DHCP (Use IP set by factory or IP set command).
1 – Try to use DHCP, if unavailable use IP as above.
Change protocol ethernet
port
Read protocol ethernet
port
PROTOCOL = TCP / UDP (transport layer protocol)
=
PORT ethernet port to enter protocol 3000 commands.
1-65535 = User defined port
0 - reset port to factory default (50000 for UDP, 5000 for TCP)
Advanced switching commands
Command Syntax
Set audio follow
AFV AFV-MODE
video mode
Note:
This command effect device front-panel mode and AUD\VID command.
Read audio follow AFV?
video mode
www.camboard.de
50
CAMBOARD Electronics
Kramer Protocol
Identification commands
Syntax
Network settings commands
NET-IP IP_ADDRESS
NTIP
NET-IP?
NTIP?
NET-MAC?
NTMC
NET-MASK SUBNET_MASK
NTMSK
NET-MASK?
NTMSK?
NET-GATE GATEWAY_ADDRESS
NTGT
NET-GATE?
NTGT?
NET-DHCP DHCP_MODE
NTDH
NET-DHCP?
NTDH?
ETH-PORT PROTOCOL , PORT
ETHP
ETH-PORT? PROTOCOL
ETHP?
Tel. 07131 911201
Fax 07131 911203
Response
NET-IP IP_ADDRESS RESULT
NET-IP IP_ADDRESS
NET-MAC MAC_ADDRESS
NET-MASK SUBNET_MASK RESULT
NET-MASK SUBNET_MASK
NET-GATE GATEWAY_ADDRESS RESULT
NET-GATE GATEWAY_ADDRESS
NET-DHCP DHCP_MODE RESULT
NET-DHCP DHCP_MODE
ETH-PORT PROTOCOL ,PORT RESULT
ETH-PORT PROTOCOL , PORT
Response
AFV AFV-MODE RESULT
AFV AFV-MODE
ce-info@camboard.de
KRAMER: SIMPLE CREATIVE TECHNOLOGY