Confirming Settings; Toggling Between At Once And Confirm Modes; Confirming A Switching Action - Kramer VP-885 User Manual

To disconnect all outputs:
• Press the ALL button, followed by the OFF button

7.3 Confirming Settings

You can choose to work in the At Once or the Confirm mode. When the
VP-885 operates in the At Once mode, pressing an output-input combination
implements the action immediately. In the Confirm mode, the TAKE button
must be pressed to activate the switch.
The At Once Mode
In the At Once mode, execution is immediate and actions require no user
confirmation. However, no protection is offered against changing an action in error.
The Confirm Mode
In the Confirm mode:
• You can enter several actions and then confirm them by pressing the
TAKE button to simultaneously activate the multiple switches
• Every action requires user confirmation which protects against erroneous
switching
• Execution is delayed

7.3.1 Toggling between At Once and Confirm Modes

To toggle between the At Once and Confirm modes:
1. Press the TAKE button to toggle from the At Once mode
3
mode .
Actions now require user confirmation and the TAKE button lights.
2. Press the TAKE button to toggle from the Confirm mode back to the At
Once mode.
Actions no longer require user confirmation and the TAKE button no
longer lights.

7.3.2 Confirming a Switching Action

To confirm a switching action (in the Confirm mode):
1. Press an output-input combination.
The corresponding input number that is displayed in the STATUS
7-segment display flashes. The TAKE button also flashes.
1 If the TAKE button is not pressed within one minute, the action is aborted
2 The TAKE button does not light
3 The TAKE button lights
20
Operating the VP-885
1
until the user confirms the action
2
KRAMER: SIMPLE CREATIVE TECHNOLOGY
to the Confirm