Related Manuals for Kramer VP-8x8AK
Summary of Contents for Kramer VP-8x8AK
- Page 1 Kramer Electronics, Ltd. USER MANUAL Model: VP-8x8AK 8x8 VGA / UXGA / Audio Matrix Switcher...
-
Page 2: Table Of Contents
Introduction Getting Started Recycling Kramer Products Quick Start Overview Your VP-8x8AK 8x8 VGA / UXGA / Audio Matrix Switcher Using the IR Transmitter Installing the VP-8x8AK in a Rack Using the VP-8x8AK Connecting the VP-8x8AK Rear Panel Connecting the Balanced/Unbalanced Stereo Audio Output... - Page 3 Kramer Protocol 2000 Figures Figure 1: VP-8x8AK 8x8 VGA / UXGA / Audio Matrix Switcher – Front View Figure 2: VP-8x8AK 8x8 VGA / UXGA / Audio Matrix Switcher – Rear View Figure 3: Connecting the VP-8x8AK 8x8 VGA / UXGA / Audio Matrix Switcher...
- Page 4 Figure 28: CONFIGURATIONS Embedded Web Page Tables Table 1: Front Panel VP-8x8AK 8x8 VGA / UXGA / Audio Matrix Switcher Features Table 2: Rear Panel VP-8x8AK 8x8 VGA / UXGA / Audio Matrix Switcher Features Table 3: Technical Specifications of the VP-8x8AK 8x8 Video Audio Matrix Switcher 35...
-
Page 5: Introduction
3 We recommend that you use only the power cord that is supplied with this machine 4 Download up-to-date Kramer user manuals from our Web site at http://www.kramerelectronics.com 5 The complete list of Kramer cables is on our Web site at http://www.kramerelectronics.com... -
Page 6: Recycling Kramer Products
European Advanced Recycling Network (EARN) and will cover any costs of treatment, recycling and recovery of waste Kramer Electronics branded equipment on arrival at the EARN facility. For details of Kramer’s recycling arrangements in your particular country go to our recycling pages at http://www.kramerelectronics.com/support/recycling/. - Page 7 Getting Started...
-
Page 8: Overview
The VP-8x8AK is HDTV compatible and lets you route any combination of inputs and outputs. In particular, the VP-8x8AK 8x8 VGA / UXGA / Audio Matrix Switcher features: • Kramer’s innovative integrated sync processing; Kr-isp® technology that... -
Page 9: Your Vp-8X8Ak 8X8 Vga / Uxga / Audio Matrix Switcher
The Kramer infrared remote control transmitter or infrared remote extension cable transmitter (optional) • Ethernet over a LAN The VP-8x8AK is dependable, rugged, and fits into two vertical spaces (2U) of a standard 19” professional rack. To achieve the best performance: •... -
Page 10: Figure 1: Vp-8X8Ak 8X8 Vga / Uxga / Audio Matrix Switcher - Front View
Your VP-8x8AK 8x8 VGA / UXGA / Audio Matrix Switcher Figure 1: VP-8x8AK 8x8 VGA / UXGA / Audio Matrix Switcher – Front View KRAMER: SIMPLE CREATIVE TECHNOLOGY... -
Page 11: Table 1: Front Panel Vp-8X8Ak 8X8 Vga / Uxga / Audio Matrix Switcher Features
Your VP-8x8AK 8x8 VGA / UXGA / Audio Matrix Switcher Table 1: Front Panel VP-8x8AK 8x8 VGA / UXGA / Audio Matrix Switcher Features Feature Function IR Receiver The yellow LED is illuminated when receiving signals from the infrared remote control transmitter... -
Page 12: Figure 2: Vp-8X8Ak 8X8 Vga / Uxga / Audio Matrix Switcher - Rear View
Your VP-8x8AK 8x8 VGA / UXGA / Audio Matrix Switcher Figure 2: VP-8x8AK 8x8 VGA / UXGA / Audio Matrix Switcher – Rear View KRAMER: SIMPLE CREATIVE TECHNOLOGY... -
Page 13: Using The Ir Transmitter
Your VP-8x8AK 8x8 VGA / UXGA / Audio Matrix Switcher Table 2: Rear Panel VP-8x8AK 8x8 VGA / UXGA / Audio Matrix Switcher Features Feature Function AUDIO INPUT 3.5mm Mini Connect to the unbalanced stereo audio acceptors (from 1 to 8) -
Page 14: Installing The Vp-8X8Ak In A Rack
Installing the VP-8x8AK in a Rack Installing the VP-8x8AK in a Rack This section describes what to do before installing in a rack and how to rack mount. KRAMER: SIMPLE CREATIVE TECHNOLOGY... -
Page 15: Using The Vp-8X8Ak
1 You do not need to connect all inputs and outputs 2 Switch OFF the power on each device before connecting it to your VP-8x8AK. After connecting your VP-8x8AK, switch on its power and then switch on the power on each device. DO NOT push in the rear panel Flash Program “PROG” button , it... -
Page 16: Figure 3: Connecting The Vp-8X8Ak 8X8 Vga / Uxga / Audio Matrix Switcher
Using the VP-8x8AK Figure 3: Connecting the VP-8x8AK 8x8 VGA / UXGA / Audio Matrix Switcher KRAMER: SIMPLE CREATIVE TECHNOLOGY... -
Page 17: Connecting The Balanced/Unbalanced Stereo Audio Output
RS-232 9-pin D-sub port on your PC Connecting a PC or Controller to the RS 485 Port You can operate the VP-8x8AK via the RS-485 port from a distance of up to 1200m (3900ft) using any device equipped with an RS-485 port (for example, a PC). -
Page 18: Configuring The Ethernet Port
Once the machine is connected, you can configure the Ethernet port. 6.5.1 Connecting via the Ethernet You can connect the VP-8x8AK via the ETHERNET in the following ways: • For direct connection to the PC, use a crossover cable (see Section 6.5.1.1) -
Page 19: Figure 6: Local Area Connection Properties Window
Figure 7: Internet Protocol (TCP/IP) Properties Window 6.5.1.2 Connecting the ETHERNET Port via a Network Hub (Straight- Through Cable) You can connect the Ethernet port of the VP-8x8AK to the Ethernet port on a network hub or network router, via a straight-through cable with RJ-45 connectors. -
Page 20: Ethernet Port Configuration
Follow these steps to configure the port: 1. Double click the desktop icon. The Connect screen appears as follows: Figure 8: Connect Screen 2. Select the method to connect to the Ethernet port of the VP-8x8AK. Select: Ethernet, if you know the IP address number or the machine name. -
Page 21: Control Via The Ethernet Port
4. If required, make changes and press Set. If not, click Close. Control via the Ethernet Port You can control the VP-8x8AK via RS-232/RS-485 or the Ethernet using the Kramer K-Router application. If you are controlling a standalone unit via RS-232 or the Ethernet, configure the unit as master (Mach No. -
Page 22: Setting The Switching Delay Time
To exit the MACH. # mode, press the TAKE front panel button. Cascading Machines You can cascade up to 16 VP-8x8AK units with control from a PC or serial controller. To cascade up to 16 individual VP-8x8AK units via RS-485 (as illustrated in... -
Page 23: Figure 10: Control Configuration Via Rs-232 And Rs-485
Using the VP-8x8AK 5. Set the RS-485 TERM DIP-switch ON on the first and last VP-8x8AK units (terminating the RS-485 line at 120Ω). Set the RS-485 TERM DIP-switch OFF on the other VP-8x8AK units. Figure 10: Control Configuration via RS-232 and RS-485... -
Page 24: Operating The Vp-8X8Ak
The selected input number appears on the 7-segment display. Note: If the crosspoint status is disrupted, cycle the power to recover or perform the above steps for each affected output. Incomplete operations on the VP-8x8AK timeout after 15 seconds Understanding the 7-Segment Displays The VP-8x8AK has two displays: •... -
Page 25: The Rel Audio Level 7-Segment Display
Operating the VP-8x8AK Figure 12 shows an example of the display immediately after switching on the power. This display disappears after a few seconds, replaced by the normal display. Firmware Machine # version # Figure 12: 7-segment Display after Turning the Switcher ON 7.2.2 The REL AUDIO LEVEL 7-Segment Display... -
Page 26: Toggling Between The At Once And Confirm Modes
Operating the VP-8x8AK 7.3.1 Toggling between the At Once and Confirm Modes To toggle between the At Once and Confirm modes, do the following: 1. Press the TAKE button to toggle from the At Once mode (in which the TAKE button does not illuminate) to the Confirm mode (in which the TAKE button illuminates). -
Page 27: Storing An Input/Output Configuration
The memory recalls the stored data from that reference. Tip: If you cannot remember which of the 16-input/output configurations is the one that you want, set the VP-8x8AK to the Confirm mode and manually scan all the input/output configurations until you locate it. -
Page 28: Choosing The Audio-Follow-Video Or Breakaway Option
Operating the VP-8x8AK Choosing the Audio-Follow-Video or Breakaway Option You can switch stereo audio signals in one of two ways, either: • Audio-follow-video (AFV), in which all operations relate to both the video and the audio channels; or • Breakaway, in which video and audio channels switch independently 7.6.1 Setting the Audio-Follow-Video Option... -
Page 29: Flash Memory Upgrade
The VP8x8AK uses a microcontroller that runs firmware located in FLASH memory. The latest version of firmware and installation instructions can be downloaded from the Kramer Web site at www.kramerelectronics.com. 1 The input level ranges from -100 to +20 and the output level ranges from -100 to +7.5... -
Page 30: Controlling Via The Embedded Web Pages
• Load and enable Java • Enable Javascript in your browser Connecting to the VP-8x8AK via your Browser Make sure that your PC is connected via a network to the VP-8x8AK and do the following: 1. Open your Internet browser. -
Page 31: Figure 17: Loading The Embedded Web Pages
Figure 17: Loading the Embedded Web Pages Check that Java and JavaScript is enabled in your browser. The following window appears: Figure 18: First Time Security Warning 3. Click Run. The VP-8x8AK switching control page is displayed (see Figure 19). -
Page 32: The Vp-8X8Ak Switching Matrix Page
The VP-8x8AK Switching Matrix Page The VP-8x8AK switching matrix page lets you route any or all of the eight inputs to any or all of the eight outputs, by clicking the audio and/or video... -
Page 33: Switch An Input To An Output Via The Embedded Web Pages
Controlling via the Embedded Web Pages You can perform the following operations via this Web page: • Operate in the AFV mode or switch the audio and video separately, by clicking the Audio, Video or AFV buttons (see Section 9.2.1) •... -
Page 34: Store And Recall Setups
1. From the Preset drop-down list, select a preset (for example, Preset 07). Presets that contain a configuration are displayed with a blue background; presets with no configuration have a white background. When selecting a preset, the Store button changes from gray to dark blue. KRAMER: SIMPLE CREATIVE TECHNOLOGY... - Page 35 Controlling via the Embedded Web Pages Figure 23: Selecting a preset 2. Click the Preview button to view the current setup stored in Preset 7. 3. Make sure the matrix is set to the desired configuration. If not, set it as required.
- Page 36 Offline state. The recalled configuration will become active when you press the Take button. Figure 26: Recalling a Preset in the Confirm Mode The Help Box ? This is the main panel window. In this window you can control the channels. KRAMER: SIMPLE CREATIVE TECHNOLOGY...
-
Page 37: Audio Gain Page
Controlling via the Embedded Web Pages Audio Gain Page The AUDIO GAIN screen lets you set the gain for each of the input and output channels: Figure 27: Audio Gain Page To change an input or output gain, select the channel number, then click and hold the + or –... -
Page 38: The Configurations Page
Figure 28: CONFIGURATIONS Embedded Web Page HELP BOX ? This page lets you view and set the device configuration. 1 The model name, serial number, firmware version and MAC address 2 Or Cancel to cancel changes KRAMER: SIMPLE CREATIVE TECHNOLOGY... -
Page 39: Technical Specifications
Technical Specifications 10 Technical Specifications Table 3 lists the technical specifications: Table 3: Technical Specifications of the VP-8x8AK 8x8 Video Audio Matrix Switcher INPUTS: 8 XGA on 15-pin HD connectors (VGA through UXGA); 8 unbalanced stereo audio 3.5mm mini connectors OUTPUTS: 8 VGA on 15-pin HD connectors (VGA through UXGA);... -
Page 40: Default Communication Parameters
Default Communication Parameters 11 Default Communication Parameters Table 4 lists the default communication parameters as used in Kramer Electronics products. Table 4: Default Communication Parameters EDID EDID data is passed between Output 1 and Input 1 RS-232 Protocol 2000 Protocol 3000 (Default) -
Page 41: Table Of Ascii Codes For Serial Communication (Protocol 3000)
Table 5 and Table 6 list the ASCII codes that switch an input to an output for a single VP-8x8AK machine. For more detailed information, see Section 14.2. Table 5: VP-8x8AK Video Signal Codes for Protocol 3000 OUT 1 OUT 2 OUT 3... -
Page 42: Hex Codes For Serial Communication (Protocol 2000)
The Hex codes listed in this section are used to set video channels for a single machine (set as Machine 1) connected via either RS-232 or Ethernet. Similar hex codes are used when the VP-8x8AK is connected via RS-485 and the machine is set to number 2. -
Page 43: Table 11: Vp-8X8Ak Hex Codes For Increasing/Decreasing The Audio Input Gain
Hex Codes for Serial Communication (Protocol 2000) Table 11 lists the Hex codes that increase or decrease the audio input gain: Table 11: VP-8x8AK Hex Codes for Increasing/Decreasing the Audio Input Gain IN 1 IN 2 IN 3 IN 4... -
Page 44: Kramer Protocol
The Windows®-based Kramer control software operates with protocol 2000. If the VP-8x8AK is set to protocol 3000, it is automatically switched to protocol 2000. 1 You can download our user-friendly “Software for Calculating Hex Codes for Protocol 2000” from the technical support section on our Web site at: http://www.kramerelectronics.com... -
Page 45: Kramer Protocol 3000
Kramer Protocol 14.2 Kramer Protocol 3000 This RS-232/RS-485 communication protocol lets you control the machine from any standard terminal software (for example, Windows® HyperTerminal Application) and uses a data rate of 115200 baud, with no parity, 8 data bits, and 1 stop bit. -
Page 46: Command Parts Details
Design note: transparent supporting for protocol 2000 will be implemented by switch protocol command from protocol 3000 to protocol 2000, in protocol 2000 there is already such a command to switch protocol to ASCII protocol (#56 : H38 H80 H83 H81). KRAMER: SIMPLE CREATIVE TECHNOLOGY... -
Page 47: Table 15: Instruction Codes For Protocol 3000
Response Protocol Handshaking ~OKCRLF Device initiated messages Command Syntax Start message Kramer Electronics LTD. , Device Model Version Software Version Switcher actions Audio-video channel has switched (AFV mode) AV IN>OUT Video channel has switched (Breakaway mode) VID IN>OUT Audio channel has switched (Breakaway mode) AUD IN>OUT... - Page 48 PRST-VID? PRESET, * Read audio PRST-AUD? PRESET,OUT PRST-AUD PRESET: IN>OUT connections from Short form: PAUD? PRESET,OUT saved preset PRST-AUD? PRESET, * PRST-AUD PRESET: IN>1, IN>2,… Read saved presets PRST-LST? PRST-LST PRESET, PRESET, … list Short form: PLST? KRAMER: SIMPLE CREATIVE TECHNOLOGY...
- Page 49 Numeric value (present audio processing stage). For example: "0" for Input level, "1" for Pre-Amplifier, "2" for Amplifier (Out) etc. CHANNEL = Input or Output # VOLUME = Audio parameter in Kramer units, precede minus sign for negative values. increase current value, decrease current value.
- Page 50 NET-IP IP_ADDRESS NET-IP IP_ADDRESS RESULT NTIP NET-IP? Read IP Address NET-IP IP_ADDRESS NTIP? NET-MAC? Read MAC Address NET-MAC MAC_ADDRESS NTMC Set subnet mask NET-MASK SUBNET_MASK NET-MASK SUBNET_MASK RESULT NTMSK NET-MASK? Read subnet mask NET-MASK SUBNET_MASK NTMSK? KRAMER: SIMPLE CREATIVE TECHNOLOGY...
- Page 51 Kramer Protocol Network settings commands Set gateway address NET-GATE GATEWAY_ADDRESS NET-GATE GATEWAY_ADDRESS RESULT NTGT NET-GATE? Read subnet mask NET-GATE GATEWAY_ADDRESS NTGT? Set DHCP mode NET-DHCP DHCP_MODE NET-DHCP DHCP_MODE RESULT NTDH NET-DHCP? Read subnet mask NET-DHCP DHCP_MODE NTDH? DHCP_MODE = 0 – Don't use DHCP (Use IP set by factory or IP set command).
-
Page 52: Kramer Protocol 2000
Similarly, if switching is done via the machine’s front-panel, then these bits are set with the OUTPUT NUMBER which was switched. For other operations, these bits are defined according to the table. BYTE: Bit 7 – Defined as 1. Bit 5 – Don’t care. OVR – Machine number override. M4…M0 – MACHINE NUMBER. KRAMER: SIMPLE CREATIVE TECHNOLOGY... -
Page 53: Table 17: Instruction Codes For Protocol 2000
LOCK FRONT PANEL 0 - Panel unlocked 1 - Panel locked REQUEST WHETHER PANEL IS LOCKED AUDIO PARAMETER INPUT Bit: SETTINGS FOR I0 - 0=input; 1=output INSTRUCTIONS 22, 25 CHANGE TO ASCII Kramer protocol 3000... - Page 54 This code is also returned to the PC if an RS-232 instruction is sent while the machine is being programmed via the front panel. Reception of this code by the switcher is not valid. KRAMER: SIMPLE CREATIVE TECHNOLOGY...
- Page 55 Kramer Protocol NOTE 10 – This code is reserved for internal use. NOTE 13 - This is a request to identify the switcher/s in the system. If the OUTPUT is set as 0, and the INPUT is set as 1, 2, 5 or 7, the machine will send its name.
- Page 57 For the latest information on our products and a list of Kramer distributors, visit our Web site: www.kramerelectronics.com, where updates to this user manual may be found. We welcome your questions, comments and feedback. Safety Warning: Disconnect the unit from the power supply before opening/servicing.