Table of Contents
Advertisement
im Vertrieb von
STAGE =
"In","Out"
or
Numeric value (present audio processing stage). For example: "0" for Input level, "1" for Pre-Amplifier, "2" for Amplifier (Out)
etc.
CHANNEL = Input or Output #
VOLUME = Audio parameter in Kramer units, precede minus sign for negative values.
MUTE MODE = 1 – Mute
0 – Unmute
Command
* Time settings commands require admin authorization
Read in\outs count
Read max presets
count
Reset configuration to
factory default
Command
Protocol Handshaking
Read device model
Read device serial number
Read device firmware version
Set machine name
Read machine name
Reset machine name to factory
default*
*Note: machine name not equal to model name. This name relevance for site viewer identification of specific machine or for
network using (with DNS feature on).
MACHINE_NAME = Up to 14 Alfa-Numeric chars.
* Machine factory name = Model name + last 4 digits from serial number.
Set machine id number
* Response will send after machine number has been changed. So the replay with header will be:
www.camboard.de
CAMBOARD Electronics
Kramer Protocol
Parameters Description:
++
increase current value,
--
decrease current value.
Machine info commands
Syntax
INFO-IO?
INFO-IO: IN INPUTS_COUNT, OUT OUTPUTS_COUNT
INFO-PRST?
INFO-PRST: VID PRESET_VIDEO_COUNT, AUD
PRESET_AUDIO_COUNT
FACTORY
FACTORY RESULT
Identification commands
Syntax
#CR
MODEL?
SN?
VERSION?
NAME MACHINE_NAME
NAME?
NAME-RST
MACH-NUM
MACHINE_NUMBER
Tel. 07131 911201
Fax 07131 911203
Response
Response
~OK CRLF
MODEL MACHINE_MODEL
SN SERIAL_NUMBER
VERSION MAJOR .MINOR .BUILD .REVISION
NAME MACHINE_NAME RESULT
NAME MACHINE_NAME
NAME-RST MACHINE_FACTORY_NAME RESULT
MACH-NUM OLD_MACHINE_NUMBER
,NEW_MACHINE_NUMBER RESULT
ce-info@camboard.de
49
Advertisement
Table of Contents
