5.12 Changing the language of the menu system
5.13 Identifying system status
5.13.1
Getting information about the active source
5.14 Using the dual lamp system
F35/FL35
User's Guide - Basic setup
user's guide - Basic setup
The projector menu system has a total of 11 user-selectable languages embedded for easier
use all over the world. The default language is English.
The available languages are:
English
•
•
French
•
German
•
Spanish
•
Russian
Norwegian
•
•
Swedish
•
Korean
•
Japanese
•
Chinese Simplified
•
Chinese Traditional
•
Portuguese
•
Italian
To change the language of the menu system, just select "LANGUAGE" from the top menu
and select your desired language.
For ease of use, the projector has a complete menu available for system status. It is easily
accessible from the top menu. From this menu the following information can be read:
•
Part number
•
Serial number
The year/week the projector was manufactured
•
•
Current software version
•
Runtime and remaining time for both lamps
•
Total number of operating hours
All network information
•
•
Current lens mounted
•
Currently active source
By selecting STATUS > SOURCE INFORMATION basic information about currently active
source is displayed.
If a deeper analysis is required for the currently active source, select STATUS > SOURCE IN-
FORMATION > ADVANCED. This menu provides detailed timing information for the currently
active source.
The projector is fitted with two individual projection lamps* that can be run in various modes.
(UHP models only)
30