Appendix B : Battery Replacement In The Rcu - Barco R9001280 Owner's Manual

Battery Replacement in the RCU
B
BATTERY REPLACEMENT IN THE RCU
Battery replacement in the RCU.
Remove the battery cover on the backside of the remote control by
pushing the indicated handle a little to the bottom of the RCU. Lift up
the top side of the cover at the same time.
(fig. 1)
Remove the battery from the compartment and disconnect the
contact plate. (fig. 2)
Connect a new 9 V battery (E-block type, e.g. type 6F22S or
equivalent) to the contact plate.
Insert the battery back into the compartment.
Put the cover back.
fig. 1
Contact
plate
Battery
fig. 2
310a .DRW
B - 1
5975348 BARCOVISION 8200 210497